Each photographic print ordered will be printed on Fuji Deep Matte Velvet paper. It is a professional paper with a deep matte and non reflective surface that feels velvety soft. Each print will be finished with a lustre coating, which is a protective layer that will add to the life of your purchase as well as its beauty.The premium inks used in the production of these are archival inks, which produce smooth tones and rich colors.
All prints will be shipped rolled in a mailing tube, unless the purchaser selects an optional backing for the print. Two backings are currently available:
2 mm Styrene
Styrene is a super smooth plastic mounting substrate that
resists warping, making it an excellent choice for adding durability to
prints of all sizes. Available in both white and black.
3/16 inch Gatorfoam
Gatorfoam is a very rigid, durable and lightweight backing that will not warp. Mounted on the back are two mounting rails, either 3/4 inch or 1 1/2 inch depending on the size of the print. allowing the print to standout from the wall. A hole is provided in the center of the top rail for hanging.
MetalPrints™ represent a new art medium for preserving photos by infusing dyes directly into specially coated aluminum sheets. Because the image is infused into the surface of a brilliant, white, high gloss aluminum, your images will take on an almost magical vibrance.
Delivered Ready to Hang
All metal prints are equipped with float mount hangers, which float the print 1/2-inch off the wall.
A photographic print bonded with high pressure and heat onto museum-quality canvas and then wrapped around a 1 1/2 inch stretcher frame, making the photo's edges visible on the sides of the frame. The canvas is then treated with a protective lustre coating.
Delivered Ready to Hang
All gallery wrap canvas prints are finished with a wire hanger and bumpers.
A photographic print bonded with high pressure and heat onto museum quality canvas, then stretched and stapled onto a wood artists’, 1 1/2 inch stretcher bar frame. The canvas is then treated with a protective lustre coating. All stretched canvas prints are finished with a wire hanger and bumpers.
Canvas Board Prints are made with a print on Kodak Endura Silver photo paper bonded onto museum quality canvas. The print is then mounted on 3/16 inch gatorfoam, which is a very rigid, durable and lightweight backing that will not warp. The canvas is then treated with a protective lustre coating. All canvas board prints are finished with two mounting rails, either 3/4 inch or 1 1/2 inch depending on the size of the print, allowing the print to standout from the wall. A hole is provided in the center of the top rail for hanging.
Should you have a special request regarding additional sizes, framing or hanging options, please feel free to contact us.
*Please note, that all pieces are printed upon purchase, which results in a slightly longer turnaround time. They are not off-the-shelf. Also, there is always the possibility that Rick may be on a photography trip, in which case we will notify you of the likelihood of a delay in receiving your print.
The dimensions on each print are approximate. This is due to the slight variations in medium used for printing the images, as well as any variation in the images themselves. Meaning, the way the image is processed and finalized prior to printing, either through cropping or resizing for print.